Stock 240Z strut housings, shortened by 1-1/2" front and rear
Carrera 2-1/2" ID coilover
kits - 10"x225lb/in front, 8"x300lb/in rear,
Stock 240Z strut top cushions and spring seats - seat modified with muffler
tubing welded in center for centering 2-1/2" spring.
Tokico Illumina strut cartridges (240Z front cartridge used in shortened
rear strut housing, VW Rabbit front strut cartridge used in shortened front
strut housing).
7/8" (280Z) front anti-sway bar with polyurethane bushings. No rear
bar.
Polyurethane bushings at inner front control arm pivot, inner and outer
rear control arm pivots.
Adjustable caster kit at front, using polyurethane bushings.
Inner front control arm pickup point on cross member modified for separate
vertical and horizontal adjustability to fine tune bumpsteer, camber.
Strut top cushion mounting holes in body slotted for maximum negative camber
adjustability.
3/4" Aluminum strut housing -to- steering arm spacers
